FYSETC 3D Printer Controller - StrideMax Dual FD Motherboard - TMC5160 Stepper Motor Driver Board: Easy Connect Fan Thermistor RGB Light Based RP2040 Support RRF Klippe CAN USB Interface for VoronVz

Description

FYSETC Upgrade 3d printer controller mainboard - StrideMax Daul FD, a RP2040-based control board with dual TMC5160 drivers that can run RRF firmware or Klippe firmware. It is very suitable for high-speed 3D printing and high-torque CNC driving needs. Packge Contents: 1pc StrideMax Dual FD v2.0 board + 1pc connecting cable Features: 1.Dual TMC5160 up to 10A 2.Dual car Fuse 3.RP2040 MCU，Klipper & RRF Firmware Support 4.CAN / CANFD & USB interface 5.60V max Power Supply 6.DIN mount case ready 7.Onboard heatsink 8.Onboard Additional temperature sensor for each MOSFET Array 9. 2 x 4Pin controlled Fans，3 x temperature sensor，2 x I/O 10. 1 x Neopixl RGB support Warning: The limit voltage of the driver is 60V, which does not mean that the 60V power supply can be directly used for work, because the voltage may rise instantaneously when the power is turned on or the motor is working, which will damage the driver.

Features

• 1. Great Expansion Board: StrideMax Dl FD is a dual-channel TMC5160 control board supports 48V, a useful hardware component of the system for High-speed 3D Printers or AWD of VzBoT Printer project. Multiple modules can be used simultaneously with klipper or RRF to meet the high-speed requirements of 3D printers. It also provides additional temperature measurement, fan control, I/O expansion, and RGB light strip support, which is especially suitable as a Supplement to the general control panel.
• 2. More Support: This is a relatively complicated control board. For more detailed usage, please search on github: FYSETC/Stridemax_Dual_FD or on WiKi- FYSETC StrideMax Dual FD. If still have any questions while using, please feel free to contact us via your order ID. We and our engineers will give you direct help.
• 3. Features: with Dual TMC5160 stepping drivers. Each 5160 driver group has 8 high-power MOSFETs and is covered by a heat sink. It provides two fan positions for expansion, so that the drive current of each channel can reach 10A, and it can easily drive an 86mm stepper motor. 2pcs Car Fuses for safety guarantee; Onboard heatsink; 19-60V wide voltage support(Recommend 19-55V for the drive to work properly); Din mount case ready.
• 4. Multi-Firmware Compatibility: Based on RP2040 MCU, supports Klipperr & RRF Firmware; can be used as CAN / CANFD & USB interface. About Power Supply, It is recommended to use a 19-55V regulated power supply, which is determined according to the motor. Or Appropriate control signal source, such as control board, PLC, etc. Or A matching stepper motor.
• 5. Easy Installation: Other 3d printer accessories terminals are clearly marked, simple to connect. 1 x Neopixll RGB support, 2 x 2-4Pin controlled Fans, 2 x I/O, Onboard Additional temperature sensor for each MOSFET Array*3pcs.