FYSETC 42-34 Stepper Motor, Ender 3 V2 CR6 SE CR10 Nema17 Motor for Ender 3 X/Y/Z Axis, for CR-10 10S Ender 3/ Pro/Max Ender 5 3D Printer, 2 Phase 1A 1.8 Degree 0.35N.M with 39.3inch Cable

Description

Specifications: Model Type: MS17HD4P484A-01 Condition: 100% brand new Number of phase: 2 Step angle: 1.8 degree Rated Voltage: 6 V DC Rated Current: 1A Holding Torque: 0.35 Nm Typ.(Two phase on/rated current) Phase Resistance: 5.75 ohm±10%(20℃） Phase Inductance: 8.4mH±20%(1kHz 1V rms) Rotor Inertia: 38 g.cm2 Motor Weight: 0.22 kg Insulation Class: B(130℃) Connection: Yellow(A+), Green(A-), Red(B+), Blue(B-) What the steps/rev are for this stepper motor? please see the below formula: E-Steps-per-MM=(Motor Steps * Micro-stepping*Gear Ratio) / (Hobb Diameter*π) Standard motor steps / rev =200 Standard micro-stepping = 16x Gear Ratio = 3 Hobb Diameter (Effective)= 7.3 Warning: Make sure the motor connect to a constant current or chopper drive controller before you test motor. Connecting the motor directly to a power supply will destroy the motor. Package Included: 1 x 42-34 Nema 17 Stepper Motor 1 x 39.3 in Cable

Features

• Motor Model: 42-34 Nema 17, widely work for Most 3D Printers (like CR-10 Series Z-axis or Ender-3 X/Y/Z-axis), machinery and equipment.
• High torque -Holding torque up to 0.35Nm. Low loss stators have better high speed performance.
• Size: 42mm X 42mm X 34mm. 2 Phase 4 Wires, with 39.3 in/ 1 Meter cable.
• 100% brand new, ROHS and CE certified.
• Package Includes: 1 x 42-34 Nema 17 Stepper Motor; 1 x 39.3inch connecting cable.