PEI Honeycomb Sheet,Upgraded 0.5mm Etched Bambu Build Plate for Bambu Lab X1C/X1/X1E/P1P/P1S/A1 3D Pritner,Honeycomb+Square Flexible Spring Steel Sheet for Bambu Lab 3D Printer 257x257mm. 257x257mm for Bambu Lab X1/P1P/A1/Series

Description

Sahvaim PEI Honeycomb Sheet,Upgraded 0.5mm Etched Bambu Build Plate for Bambu LabX1C/X1/X1E/P1P/P1S/A1 3D Pritner,Honeycomb+Square Flexible Spring Steel Sheet for Bambu Lab 3D Printer 257x257mm.

Features

• 【Newly upgraded etching technology】The bambu build plate adopts a new etching technology, and the entire panel feels very textured and beautiful. Its surface material is upgraded PEI, which has strong adhesion. Compared with other holographic pattern films (like PEO/PET/PEY), this build plate has a longer service life and does not have the problem of film layer falling off.
• 【Made of 0.5mm thick spring steel plate】The build plate is made of high-strength 0.5mm spring steel plate, which has good flatness and elasticity. It's not easy to deformation after repeating bending. Just wait for the model to cool down and easily remove it without the need for any other tools
• 【Parameter Suggestion】After leveling the platform, adjust the distance between the nozzle and the first layer of the hot bed to 0.1~0.2mm. It is recommended that the first layer of the model slice be set to 0.2mm.First layer speed is recommended 10~50mm/s. Print ABS, PETG class close blowing fan at first 3 floors. Close the blowing fan at the first floor when you print PLA. Depending on the recommended parameters for your consumables, it is recommended that the nozzle temperature of the first layer be 10 ° C higher than that of the other layers.
• 【How to get excellent adhesion】The surface of the build plate can withstand high temperatures of 200 ° C. The excellent adhesion base on selecting "Textured PEI Plate" on your slice and clean up the build plate before each using. Beside,We recommend these filaments and temperature for your building board: TPU: 30-35 ℃; PLA:40-65℃； PETG:50~80℃； ABS: 80~120 ℃ ", ASA: 80~120 ° C.
• 【 Attention and How to clean】 Our double-sided texture build plate is suitable for 3D printers with a platform size of 257x257mm and is compatible with Bambu Lab X1C/X1/X1E/P1P/P1S/A1. Please confirm your printer type before purchasing. It is particularly important to note:Do not use "acidic, alkaline"cleaners to wash (such as soap, washing powder, washing liquid, dish soap, etc.), scrub with alcohol only before and after long-term use. Dry after scrubbing.