LLPT 94 Adhesion Promoter Sponge Applicator Wipes 1 Bottle Primer for Acrylic Double Sided Mounting Molding Tape 10ml + 6 Wipes
Visit the LLPT Store
| Brand | LLPT |
| Rating | 4.3 (533 ratings) |
| Price | $9.99 |
| Category | Adhesive Primers |
Description
APPLICATION INSTRUCTION: 1. Substrate formulations and surface energies may vary for different materials; each application should be tested for compatibility in a small range before large area application. 2. Wear gloves when you use this product to avoid any skin injury and see doctor immediately if swallow this product by accident. 3. The bonding surface should be clean and dry. Contaminated surface should be cleaned with isopropyl alcohol or acetone solvent. 4. Shake the bottle gently before using. 5. Use gravity feed wipe, knurled roller or brush to apply a thin, uniform coating thickness onto bonding surfaces, which is approximately 0.002 inch (0.05 mm) or less. 6. Apply promoter only to areas that will be fully covered with tape and a drying time of 30 to 90 seconds is recommended. SPECIAL NOTES: Completely use up this liquid contents as soon as possible after opening or seal securely for next use. Apply a thin, uniform coating to the bonding surface, using the minimum amount that will fully coat the surface. Suitable on low surface energy materials before tape application to increase the initial bonding; operation temperature is between 60oF - 90 oF; coverage: approximately 75 m2 (800 ft2 ) per gallon (Based on 0.002 inch wet coating thickness). Cyclohexane: 45-50%; M-Xylene: 10-15%; O-Xylene: 5-12%; Ethylbenzene: 3-5%; Epoxy: 0.1-1%.
Features
- Some wipes might be dried out when you received due to its high vaporization, this is normal; LLPT improved package seals & provided extra primer supplement. The new package improves the dried out issue significantly and extends the validation period. If there is any sign of dry-out wipe, use the brush in the bottle to apply the primer on the surface and then use the sponge wiping all over the surface evenly for best bonding result.
- Commonly used on low surface energy materials to increase the initial bonding strength and curing better for long term performance of adhesive.
- Extremely helpful for Acrylic Double Sided Adhesive for a secured bonding initial bonding.
- 2cc per packet, use it immediately after the packet is opened. Cover up and tighten the cap of supplement bottle right away after use.
- Not only works on LLPT double sided acrylic mounting tapes, but also any other brands and compatible with 4298 Adhesion Promoter.